Full width home advertisement

Post Page Advertisement [Top]

http://www.learndigitalphotographynow...

See How This Special FREE Photography Report Reveals Professional, "Insider" Tips And Tricks For Taking Awesome Digital Photos There are a lot of tutorials on this already, but they lack some construction tips and some insight to the best materials for the job. I cover this and explain why certain materials are better when building a homemade camera dolly rig. Materials list: 




(2) Pieces of ¾ Inch MDF cut to 30"X30" Wood glue 
(2) 28" long, 2 Inch aluminum angle stock 
¼ inch drill bit (for wheel bolt holes in aluminum angle) 
5/16 inch drill bit (for carriage bolt holes in mdf) 
3/8 inch drill bit (for carriage bolt holes on aluminum angle) 
(8) Skateboard Wheels -- High Hardness (99) with a large diameter (58 mm is ideal) (16) Speed washers 
( 8) ¼ inch hex bolts 2 ½ inches long 
(8) ¼ inch flat washers 
(8) ¼ inch stop nuts (also known as locking nuts) 
(8) Nylon or metal spacers 5/8 inch wide by 3/8 inch deep with a ¼ hole 
(4) 5/16 inch carriage bolts 3 ½ inches long (trim to size after install) 
(4) 5/16 inch flat washers 
(4) 5/16 inch lock washers 
(4) 5/16 inch hex nuts (2) 10 foot sections of 1 ¼ inch schedule 40 PVC 
(1) 10 foot section of 1 inch schedule 40 PVC to use for rail joiners and end caps 
(4) 1 inch schedule 40 PVC 90 degree elbows to make end caps

Bottom Ad [Post Page]